Recommended use:
A fast drying sealer, with a very well covering film thickness. Can be applied instantly on all primers from the 2100 series.

Main characteristics:
Fast drying, excellent mechanical properties. Holds very well in atmospheric and industrial environments.

Surface preparation:
New steel: abrasive blasting to Sa 2.5, with a surfaceroughness of approximately 50µm. The substrate should be completely dry and free from oil, grease or other contaminations.

Recoating:
The substrate should be clean and dry. In case of recoating a just applicated film of paint, it is sufficient to remove dust and sand before recoating.
In case of maintenance or repair: the substrate should be made free of grease. This can be done by means of high-pressure spraying pistol and tapwater with optional cleansing agent. Also steamcleaning can be used. After cleaning rinse and dry the substrate properly. All damaged and loose paint should be removed by means of blasting. If it is not possible to blast, the substrate can be cleaned with a powertool.