Recommended use:
As a fluorescent finish by which treated objects become visible under the influence of any kind of lightsource. It can be used for warning-signs, signposts, various obstacles or pulley blocks, to name a few.


Main characteristics:
Fluorescent, fast drying. For better durability outdoors treat with a layer of KPC 1803 Daylight Varnish

Surface preparation:
New steel: abrasive blasting to Sa 2.5, with a surfaceroughness of approximately 50µm. The substrate should be completely dry and free from oil, grease or other contaminations. For the best ‘fluorescent” effect use only a white colored prime-coat.


Recoating:
The substrate should be clean and dry. In case of recoating a just applicated film of paint, it is sufficient to remove dust and sand before recoating. In case of recoating old or damaged layers of paint, treat the substrate as mentioned in the section surface preparation.

In case of maintenance or repair: the substrate should be made free of grease. This can be done by means of high-pressure spraying pistol and tapwater with optional cleansing agent. Also steamcleaning can be used. After cleaning rinse and dry the substrate properly. All damaged and loose paint should be removed by means of blasting. If it is not possible to blast, the substrate can be cleaned with a powertool.