Recommended use:
As a rust preventive coating on blast cleaned steel in epoxy systems.


Major characteristics :
Very good adhesion on blast cleaned steel. Surface tolerant. Easily applicable by spray. Using the airless spray dry coat thicknessen up tp 200 micrn can be applied in a single coat. A smooth semi-gloss surface is obtained. Recoatable with epoxy and/or polyurethane coatings within 8 hours.

Surface preparation:
Blast cleaned steel to Swedish Standard Sa 2½ and surface roughness of 50 micron gives the best result. As a miniumium requirement the surface should be dry, clean and free from dust.