Products
KPC 83600 Vinyl Top Coat
Download
Technical data sheetOmschrijving:
KPC 3600 Vinyl Top Coat is a one component, high gloss top coat with a base of vinyl co-polymer.
Recommended use:
As a high gloss top coat on a anti corrosive primer. Excellent for trailers, technical and industrial installations and agricultural machinery. Appropriate primer are KPC 3210 CR or the KPC 3501 CR.
Main characteristics:
Easy to process with airless spray or brush. Can also be used in low temperatures. A pure physical quick drying paint. Chemical resistant.
Surface preparation:
New steel: abrasive blasting to Sa 2.5, with a surface-roughness of approximately 50µm. Zinc should be cleaned of zinc salts and rinsed with freshwater. In case of maintenance old paint that doesn’t hold anymore should be removed by means of scraping, mechanical cleaning or blasting. Rust should be blasted like new steel. The substrate should be cleaned of grease and oil. This can be done by means of high-pressure spraying pistol and freshwater with optional cleansing agent. If inevitable use solvents to clean the substrate. When rotating tools are used, make sure that the tools are completely free of grease and oil.
Recoating:
The substrate should be clean and dry. In case of recoating a freshly applied film of paint, it is sufficient to remove dust and sand before recoating.
In case of repair or maintenance the substrate should be made free of grease. This can be done by means of high-pressure spraying pistol and tapwater with optional cleansing agent. Also steamcleaning can be used. After cleaning rinse and dry the substrate properly. All damaged and loose paint should be removed by means of blasting. If it is not possible to blast, the substrate can be cleaned with a powertool instead.