Recommended use:
As an anticorrosive coating on blasted steel or as a adhesion primer on galvanized steel and aluminium. Replacement of one component zinc phosphate primer, and when durability and weather exposure have to comply with the strictest requirements.

Main characteristics:
Very good adhesion on blasted steel, easy to process by spray, by which dry film thickness till 150 micron per layer is possible. A smooth, half flat surface can be obtained. Recoatable with epoxy and polyurethane paints.


Surface preparation:
New steel: abrasive blasting to Sa 2.5, with a surfaceroughness of approximately 50µm. The substrate should be completely dry and free from oil, grease or other contaminations.

New Alluminium and thermic galvanized steel: Blast with a fine, non metallic dry blastingmaterial with reduced pressure.

In case of repair: all kinds of damages should be blasted with a fine and dry blastingmaterial. When blasting is not possible, the substrate should be cleaned with a powertool.

In case of maintenance: the substrate should be made free of grease. This can be done by means of high-pressure spraying pistol and tapwater with optional cleansing agent. Also steamcleaning can be used. After cleaning rinse and dry the substrate properly. All damaged and loose paint should be removed by means of blasting. If it is not possible to blast, the substrate can be cleaned with a powertool.