Application:
As a quick drying welding or transportprimer on blast cleaned steel. Can only be used on blast cleaned steel.


Main characteristics :
Good adhesion on blast cleaned steel. Suitable for use as a transport or weldingprimer. Can be recoated with conventional industrial paints or water borne paints. Can be easily applied by conventional airspray and airless spray. Dry to handle after approx. 8 minutes on steel preheated to 25 C. Up to 35 micron d.f.t. good weldable. The product can be adjusted with normal tapwater to obtain the required film thickness, depending on temperature and conveyor velocity.

Surface preparation:
Steel blast cleaned to Swedish standard sis 055900 grade Sa 2½ and surface roughness of maximal 50 micron gives the best results. As a minimum requirement the surface should be dry, clean and free from rust.